The wing test is a success

May 17, 2019

Wing test passed for the Elixir. The CS-23 certification is getting closer!

A big step towards certification…
 
After several months of work, we have just reached an important milestone regarding EASA CS-23 certification.
As part of the latter, structural tests must be carried out on major parts. The goal is to demonstrate the reliability of the OneShot structure of the Elixir.

 

After weeks of preparation, the OneShot Elixir wing has successfully passed its resistance test.
 
We had voluntarily carried out a major repair on one side of the wing, while simulating impacts at each root to put it in the most extreme conditions possible.

 

The bending of the wing was impressive. 50cm elevation on each side of the wing.
 
It withstood 8.6 tons. Story of a transformed try.
 
 
Tuesday March 9, 2019. The faces are tense, the pressure is tangible in Elixir Aircraft’s hangar. The 8-meter OneShot wing is firmly attached to the multi-ton steel frame, ready to impose enormous stresses on it.
The test begins, the stresses increase step by step, hundred kilos per hundred kilos, ton per ton, the bending takes shape. Only the hydraulic system of the cylinder can be heard.
The bending increases further, until each end of the wing is raised to more than 50 centimeters. Constraint displayed on the screen: 8.6 tons.
Test passed!!!

 

A major step has just been made not only for Elixir Aircraft, but also for general aviation.

It is a success in 3 main aspects:

  • In accordance with the requirements of EASA CS-23, the test demonstrated the safety of the wing’s OneShot structure.
  • The repair process is validated.
  • The wing remains safe even when it has impacts.

This success confirms the interest of OneShot parts, which are at the heart of the 4th generation of light aircraft.

 Front view of the test bench.

Front view of the test bench.

 

What’s next?

At the same time, industrialization is progressing with almost completed production ranges and an expansion of our facilities to start production. We now have 800m² to produce the first airplanes, an ideal solution before moving to La Rochelle airport.

Regarding our commercial activities, we have 76 pre-orders, 3 of the last are coming from the Aéro Touring Club de France, a major aeroclub near Paris.

author avatar
Elixir Aircraft
Improve safety
Increase versatility
Reduce costs
© 2024 Elixir Aircraft
Terms of Use
|
Privacy Policy